ASSEMBLY INSTRUCTIONS
PAGE 4 OF 5
NOTE : MUST TIGHTEN SCREWS PERIODCALLY.SCREW NATURALLY LOOSEN WITH USE.CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
STEP 5(a) : Place the trundle drawer front panel
( G ) on clean surface then Fix the trundle drawer
box side panel (H) by inserting a dowel ( 9 ) then
tighten with csk screw ( 7 ) using Screw Driver as
per diagaram shown.(DO NOT FULLY TIGHTEN
IN THIS STEP)
STEP 5 (b) : Slide in the bottom drawer panel (J)
inside the groove of trundle drawer box side panel
( H ) and push it down to trundle front panel ( G )
as per diagram shown.
BOTTOM SURFACE
STEP 5 (c) : Fix the trundle drawer back panel ( I ) and trundle
drawer box side panel ( H ) by inserting a dowel ( 9 ) then tighten
with csk screw ( 7 ) using Screw Driver as per diagram shown.
(FULLY TIGHTEN ALL SCREWS IN THIS STEP)
8
J
BOTTOM SURFACE
STEP 5 (d) : Fix the trundle bottom
drawer panel ( J ) with Pan head
Screw ( 8 ) and tighten using Screw
Driver as per diagram shown.
x2
x4
x6
x4
9
7
I
H
I
J
H
H
LINE MARKING
G
H
H
7
9
G
G
7
K
STEP 5 (e) : Fix the trudle bottom support rail
( K ) & ( L ) and tighten using Screw Driver as
per diagram shown.
x8
BOTTOM SURFACE
x2
K
L
FOLLOW THE MARKING
LINE
FOLLOW THE MARKING
LINE
H
