Hobym Observatory Crux140 Traveler, Руководство пользователя

Страница: 11 / 48

HOBYM Observatory
11
9. Precautions for Use
1.
If you forcibly mount a large telescope, it may damage the equatorial mount. The payload
may vary depending on the size of the telescope, even in the case that the telescopes have
the same weight.
2.
When using bolts other than the supplied M8 bolt, pay attention to the length of the bolts and
use only the ones with the proper length. If the bolt is too long, it may damage the parts
protecting the harmonic gear system.
3.
Adjust the altitude azimuth after loosening the fixing handle. Forcibly adjusting with a wrench
in a tightly joined state will cause damage to the mount.
4.
Do not supply more than the specified voltage. (DC 12V)
5.
Please refrain from using the equatorial mount in case of excessive moisture and rain.
6.
Since the driving torque is strong, make sure to fully understand the safety zone function of
Titan TCS and carefully set it up at the initial set up.
7.
Avoid applying excessive shock to the mount or dropping it. In these cases, the axis may
bend, or the tooth surface of the harmonic gear may be damaged, causing a decrease in its
accuracy.
8.
Tripods and piers should be sturdy. Especially, tripods for general photography have a narrow
angle compared to astronomical use. We recommend using an astronomical tripod.
9.
Do not loosen the altitude adjustment lock handle too much when adjusting the altitude. If you
loosen it too much, the polar axis may deviate after locking.
10.
In case of using GoTo function frequently, lower the slewing speed to prevent the motor from
overheating. When operated at the highest speed for a too long time, it may lower the
performance of the motor due to the overheating.