manualshive.com logo in svg

Hobie Hobie T2, Руководство пользователя

Поделиться
Скачать
Hobie Hobie T2 Скачать руководство пользователя страница 5

Ref : OM_T2

Issued by : SD

Date : 12/2013

Up-date : 0

Page : 5/44

Copyright HCE 2013 - www.hobie-cat.net

E U R O P E

5

Hobie Cat® Europe

Owner’s manual - Hobie T2

Read carefully before sailing :

• 

Whether on land or on the water, WATCH FOR OVERHEAD POWER LINES. Contact with power lines can cause serious 
injury or death. 

• 

DO NOT sail while under the influence of alcohol and/or drugs 

• 

Only sail in conditions in which you feel comfortable and where you feel confident that you can safely sail the boat. 
Never go out in conditions beyond your ability. 

• 

Everyone on board should wear a life jacket at all times (see the regulations in force). 

• 

If you are in the water, remain in contact with the boat, even if it is capsized. A sailboat can drift away faster than a 
person can swim. 

• 

Never sail without a righting line. 

• 

Wear appropriate clothes. Wear a wet suit or dry suit in cold weather or cold water conditions. 
Protect yourself against heat and sun. 

• 

Learn about the local sea regulations. 

• 

Learn the right of way rules and when in doubt, give way to others. 

• 

When not sailing, always keep the boat pointed into the wind whether in the water or on the beach. 

• 

Read the instruction manual carefully. 

• 

Make sure everyone on the boat reads and understands these safety instructions. 

• 

ALWAYS check that the drain plugs are screwed in before launching your catamaran. Remove the plugs after sailing 
to drain any water that may have leaked into the hulls. 

Safety equipment :

All necessary safety equipment must be available on board. (Life jackets,  etc.) and must correspond to the boat type, wea-
ther conditions, etc. This material is mandatory in some countries. The crew must know how to use this material and how 
to behave in case of emergency (men at sea, towing, etc.) ; Sailing schools and clubs regularly organise training sessions 
to learn how to use the safety equipment and how to behave in case of emergency.

Safety advices

Содержание Hobie T2













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды