background image

2 WAY V - VENTING SYSTEM

Hobie has created a unique two-way vent system that equalizes 

pressure due to temperature or altitude variation.  Hassle free, no 

unplugging, screwing or unscrewing required. 

• 

Upon first use, be sure to check that the vent  cap is tight. 

Tighten vent using a quarter or large screwdriver

• 

THERE IS NO NEED TO UNSCREW VENT PRIOR, DURING OR 

AFTER USE.

Attachment points are 

molded into the surface of 

the board 

Be sure that all loops or 

hooks are securley under 

the metal bar inside of the  

attachment point 

MOLDED ATTACHMENT POINTS

Some molded epoxy SUPs come with built in attachment points 
These inserts are molded in the boards to allow the user to attach or tie down items such as 

coolers, fishing equipment, etc
These attachment points are intended on tying items down to your board. 

DO NOT USE THESE TO TIE BOARD TO VEHICLES OR TO TOW

HOBIE 3:1 INTEGRATED HANDLE

 

H

HOBIE 3:1

INTEGRATED 

HANDLE

3 in 1 Design

2 Way V Vent

Ergonomic Hand Hold

Integrated Security 

Bar for locks

INTEGRATED SECURITY BAR 

A high strength stainless steel bar has been built in to the H3 

handle. This allows the board to be secured using a simple 

cable lock

ERGONOMIC HAND HOLD

Contour molded hand hold designed for easy access and a 

secure and comfortable grip.

Ergonomic Hand Hold

Contour molded handhold designed for easy 
access and a secure and comfortable grip

Содержание HCX









Отзывы: