background image

10

 

Warranty

Our Commitment

Here at Hobie we’re enthusiasts like you. We know all about early morn-

ing fishing trips, family time at the beach, or summer time on the lake. 

We love being out there, and we’re sure you do too. Our goal is to keep 

you out on the water having fun for many years to come.

Warranty

Rest assured that when you purchase your new Hobie from an autho-

rized Hobie dealer it comes with a 3-Year Warranty. The Warranty does 

not cover normal wear and tear, improper storage, or running into 

stuff. The Warranty covers defects in the materials, manufacturing and 

design.

To Obtain Warranty Service

Within 30 days of discovering a defect, take your Hobie product, along 

with proof of purchase (sales receipt or registration card) to the autho-

rized Hobie dealer from whom you purchased your boat, unless you have 

moved or are traveling. In that case, take it to the nearest authorized 

Hobie dealer.

Disclaimer – Product Life Cycle

Every Hobie has a useful product life cycle. The length of that life cycle 

will vary depending on multiple factors including; the construction 

and materials, storage and transport, maintenance and care, and the 

amount and type of use your Hobie is subjected to over its life. We have 

been engineering fun on the water since 1950. However, we can’t engi-

neer our products to survive improper usage, such as incorrect storage 

or transport, exposure to excessive heat or sunlight, or collisions with 

your garage. Whatever the case may be, we’ll always point you in the 

right direction.

Содержание 16





































Отзывы: