HobbyZone Firebird II st, Инструкция по эксплуатации

Страница: 3 / 16

Step 2
5
Step 1
4
Attaching the Wing
1. Center the wing on the fuselage by aligning the
center dot on the wing with the fuselage top
seam and by centering the half circle on the
wing's trailing edge over the fuselage center.
2. Secure the wing in place by attaching two
rubber bands across the middle and one on
each side as shown. Locate the rubber bands
on the peg hooks as close as possible to the
fuselage sides.
3. Before each flight, make sure the front and
trailing edges of the wing are exactly centered
on the fuselage.
1. Remove the transmitter back cover by pushing
down with thumbs, as indicated by the arrows.
2. Install the batteries. Use fresh 1.5V “AA”
batteries only.
3. Watch polarity. Replace the cover.
4. To test, switch on the transmitter. The LED
should glow brightly.
5. Replace the batteries when you hear the
low-battery alarm (beeping sound).
Needed for Step 1
"AA" Heavy-Duty Batteries
(x8 - included)
Transmitter Wing Attachment
Rubber Bands (x4)
Needed for Step 2
5952_HBZ Firebird IIST Manual 8/8/03 4:27 PM Page 4