Install the aileron servo mount
and servo as shown in the picture
above.
Fit and glue in place the elevator hinges
(Note: It is recommended to keep
a
1mm
gap
between the elevator and tail
plane
so that the
elevator can move freely without binding.
)
Insert the wings either side of
the fuselage and feed the ailerons
servo leads through into the
receiver compartment.
As shown in the
picture
, tension
the wing hook
s
with a rubber band
and wrap
around about 3 times
.
Please ensure the wing peg is
located properly for safety.
As shown
above slide the
elevator
and then the tailplane
through
the fuselage.
