HobbyKing 9110000034-0 Скачать руководство пользователя страница 2

.

.

Too

ls and 

items 

required

1::: 

:

1

,:

:::::::::: ::

:

:: :: :,::�: ��:: ::.:.:::� :: :

:

·:::

:

::·:::�:: 

:

�:

:

.

:

�� :, 

Ruler 

Phllllps Screwdriver

�s:s:ss. 

Drill Bit -2mm 

-

Lodi 

-

-

Clear Tape 

..........:0 

f  :ti 

Hobby Knife

===1c:=t  ] 

Hex Driver  - 1.Smm  §§ 2.5mm 

Epoxy  Epoxy 

CA 

Glue 

Pllors 

Thread Lock 

Thin/Thick CA 

5 M

in 

Epoxy 

4+ Channol Tron1 Rocolvor 

3S 11.1v 3000mAh LIPo 

3648 850kv Motor 

40 Amp Bn..11hle11 ESC 

LIPo Chergor 

-

• 

• 

2• 9g S0rvo1 

2• 17g Servos 

--

---

-

2·soomm SoNo E_,ctonalona 

Thankyou for purchasing your HobbyKing Waco SRE. We hope 

you enjoy assembling and flying it as much as we did creating 

it. This sport scale model was created in the true spirit of Bernie 

Pietenpol, it is easy to build and great fun to fly.

Like the fullsize Waco SRE the airframe is all wood, we have 

used balsa and plywood with an epoxy fiberglass cowl, 

plywood wing mounting struts and aluminum landing gear. The 

lightweight airframe makes the Waco SRE perfect for those lazy 

days at the flying field flying

low and slow.

Warnings.

HobbyKing aircraft follow an extensive design, development, and testing process to 

bring reliable and user friendly products to the masses. They undergo extensive quality 

control checks at the factory.

Please read this instruction manual thoroughly before assembling and flying this model. 

It is not a toy and if mistreated has the potential to inflict bodily injury or damage to 

property. It is your responsibility to complete final assembly, setup, and routine pre-flight 

checks. Always make sure to check for any loose screws or parts, and that the airframe 

is free from damage that may cause failure in flight. HobbyKing is not responsible for 

any injury or property damage inflicted due to negligence in assembly or maintenance.

• Select your flying area carefully. Always choose an open space that is unobstructed by

trees, buildings and away from crowded areas. Avoid flying in areas with roads, electric

or telephone wires or close proximity to fullsize air traffic.

• Do not fly this model in poor weather including high winds, low visibility, rain or

thunderstorms.

• Never attempt to catch this model whilst in flight, even a slow moving model can cause

harm to yourself or others.

• This model is recommended for modellers over the age of 14 years old. All children

should always be supervised by a capable and responsible adult when operating this

model.

• Always unplug your model battery when not in use, do not leave the battery installed in

the model when not in use.

• Remain clear from the propeller at all times when the flight battery is connected, a

spinning propeller can cause serious injury.

• Before flying always turn ON your transmitter first, then connect your flight battery to the

model.

• After flying, always disconnect your flight battery first, then tum OFF your transmitter.

•Always exercise caution when charging batteries. Follow the recommended charging

instructions from your battery manufacturer, and use a charger with charging parameters

that match your battery type.

Содержание 9110000034-0










Отзывы: