HobbyGrower Special Edition Enthusiast Скачать руководство пользователя страница 3

Страница: 3 / 39

TOOLS & EQUIPMENT REQUIRED

SAFETY ADVICE

GENERAL ADVICE

CARE & MAINTENANCE

See next page for complete list of parts

• Do not attempt to assemble the greenhouse in windy

or wet conditions.

• Take special care not to touch overhead power

cables with aluminum profiles.

• Ensure that there are no buried pipes or cable in the

ground before inserting the ground stakes.

• Always wear shoes and saftey goggles during assembly.

• We strongly recommend the use of work glove during

assembly as aluminum profiles and steel bases
components may have sharp edges.

• Dispose of plastic bags and protective poly film covers

safely - keep them out of reach of small children.

• The greenhouse must be positioned and anchored on

a flat, level surface.

• Do not lean on or push against the greenhouse

during construction.

• Keep children away from assembly area - the

aluminum profiles may have sharp edges.

• Do not position your greenhouse in an area exposed

to heavy wind.

• Do not attempt to assemble the greenhouse if your

are tired, have taken drugs or alcohol or if you are
prone to dizzy spells.

• If you use a step ladder, carefully follow the

manufacturer's instructions.

• Hot items such as recently used grills, blowtorches,

etc. must not be stored in the greenhouse.

•

Before beginning the assembly process,

confirm

that all necessary parts have been included in the
package. It is advisable to lay the parts out in an
orderly fashion according to the part numbers so that
parts can be easily identified during the assembly
process. If parts are missing, contact Palram Americas
Hort Division at (800) 994-5626.

• This is a multi-part assembly. Average assembly time

is between 4 to 6 hours from start to finish, however, it
may take longer. Do not begin assembly if heavy
winds or rain are expected within 12 hours.

• Choose a sunny

level

location for your greenhouse,

away from overhanging trees.

• You can opt to use the base brackets supplied to

anchor your greenhouse to a concrete floor, or you
can use the base supplied base kit . If you intend to
anchor your greenhouse directly to concrete, you must

purchase separately concrete anchor screws. The
area required for the greenhouse is 104.5" (266cm)
length x 83" (212cm) width.

• It is advisable to use lubricant to ease the connection

between aluminum profiles and panel (a mild soap and
water solution in a pump-spary bottle is useful for this).

• Note that the door is permanently hinged on the right

hand side and therefore opens out and to the right.

• We strongly advise that you keep the special poly-film

protective covers on the side panels and the first row
of roof panels until that greenhouse is fully
assembled. You should however remove the poly-film
prior to installing the very top roof panels. You should
also remove the rest of the protective poly film
immediatly after assembly.

• Keep roof clear of snow and leaves.

• Use mild soap and water and a soft cloth to wash

greenhouse glazing panels. Rinse with cold water.

• Do not use acetone, abrassive cleaners or sponges, or

other amonia-based cleaners to clean the clear panels.

• Some chemicals and cleaners can be agressive to the

clear panels, which are made of polycarbonate. For a
complete list of chemical compatibility, visit:

http://www.spscorp.com/compatibility

• To purchase replacement parts, contact customer

service at Palram Americas at (800) 994-5626.

• 100% "Silicone" Sealant

(compatible w/polycarbonate)