Hobby Caravan Series, Руководство пользователя

Страница: 60 / 118

07-
7.3 Electrical supply
Supply via mains connection
The camper receives its electric power supply via
the 230 V CEE feeder plug on the side wall of the
vehicle.
To connect:
• Turn off the automatic circuit breaker () by
pressing the rocker switch down.
• Grab the bottom of the protective cover of the
exterior socket (1) and flip it up.
• Completely unwind the connecting cable,
insert the plug (2) and snap it into place.
• Turn the automatic circuit breaker () back on.
To disconnect:
• Turn off the automatic circuit breaker () by
pressing the rocker switch down.
• Press the lever (3) in the exterior socket down.
• Pull out the CEE plug (2).
• Press the protective cover of the exterior so-
cket down until it snaps into place.
The 230 V system is protected by a two-pole
3 A automatic circuit breaker (), which is loca-
ted in the wardrobe. (Exceptions to this include
special installations such as ultraheat, hot-water
heating, etc. In this case, an additional two-pole
6 A overload circuit breaker is installed.)
2
Electricity for the camper can be obtained from
the following connections:
- 230 V
mains connection 50 Hz. ()
-
via the base vehicle if it is connected using the
3-pole plug (limited functions)
- via a built-in auxiliary battery (not included).
Everything that uses 2 V, such as lighting,
water supply, etc., is available.
3