Hobby 4 CH BlitzRCWorks Sky Surfer RC Trainer Airplane Скачать руководство пользователя страница 8

Страница: 8 / 15

Assembly Instructions

Attach the

elevator servo to the horizontal stabilizer (elevator)

Glue the horizontal stabilizer into the fuselage as shown. In order to control the movement of

the elevator, you will need to attach the elevator servo's push rod/clevis to the control horn

using one of the long linkage rods that runs along the inside of the fuselage. Make sure to

secure the control horns with the supplied screws and backing plates. Please note that the

elevator and rudders use a similar push rod, do not get them confused.

Attach the

rudder servo to the vertical stabilizer (rudder)

Glue the vertical stabilizer to the end of the fuselage first. In order to control the movement of

the rudder, you will need to attach the rudder servo's push rod/clevis to the control horn using

one of the long linkage rods that runs along the inside of the fuselage. Make sure to secure the

control horns with the supplied screws and backing plates. Please note that the elevator and

rudders use a similar push rod, do not get them confused.

Must be positioned

this way

Control Arm

Elevator linkage wire

Must be positioned

this way

Rudder

Elevator

Rudder linkage wire

Содержание 4 CH BlitzRCWorks Sky Surfer RC Trainer Airplane















