Hobby King X-Car 120A, Руководство пользователя

Страница: 8 / 16

batteries. If you are using more than 6-cell NiMH or NiCd batteries, you must adjust the cutoff
voltage, for example if you are using an 8-cell pack of NiMH batteries you would use a cutoff of
5.6V volts (8 x 0.7V = 5.6V). When the voltage of the batteries packs is within 8.4~12.6V, the
ESC will automatically identify 3S LiPos. When the voltage of the batteries packs is less than
8.4V, the ESC will automatically identify 2S LiPos. When the voltage of the batteries packs is
within 8.4~16.8V, the ESC will automatically identify 2~4S LiPos. When the voltage of the
batteries packs is within 21~25.2V, the ESC will automatically identify 5-6S LiPos.
● Customized Voltage Cutoff
(for NiMH or NiCd Batteries) you can select a starting cutoff
voltage of 4, 5, 6, 9 or 12 volts. Then using the up/down to the right of the voltage you can
increase the voltage stepping up 0.1V between the selectable settings.
* When using any
Lithium batteries,
they must not be discharged to less than 3.0V per cell.
2. Running Mode
● Forward w/o Reverse
This is a Race setting - Reverse is disabled.
You will find in racing, most tracks will not allow racing with reverse enabled.
● Forward with pause then Reverse: (DEFAULT)
General bashing around (FUN) or racing if reverse is allowed for the event. The Electronic Speed
Controller requires 2 seconds of continuous neutral from the transmitter prior to allowing reverse
7
120A/150A ESC