manualshive.com logo in svg

Hobbico TACTIC TTX650, Инструкция по эксплуатации

"Tactic TACTIC TTX650" является передовым пультом управления, который обеспечивает широкий спектр функций для вашего радиоуправляемого устройства. Настройка устройства легка с помощью руководства по начальной настройке, которое можно загрузить бесплатно с manualshive.com. Начните использовать ваш TACTIC TTX650 с уверенностью!

Поделиться
Скачать
background image

27

When the 2AI wing type is selected the brake can be mixed 

to elevator and/or aileron. Adjust each mix percentage as 
needed. Select a switch to turn the mix on/off.

When the 2AIL1FL wing type is 

selected the brake can be mixed with 
the elevator, aileron, or fl aps. Adjust 
each mix percentage as needed. 

Select a switch to turn the mix on/off. 

PROGRAMMABLE MIXER

Up to four programmable mixes can be set, with one 

channel being mixed to any one or more channels. Control 
characteristics from the “input” channel will be passed to the 

“output” channel(s), such as travel limits, exponential, etc. The 

output channel will still be able to function independently as if it 
were not mixed with another channel, but once an adjustment 
is made to the input channel a resulting change will be seen 
on the output channel as well. The mix level can be adjusted 
by percent. A switch can be assigned to turn this mix on/off.

Enter the mixer screen. Move the cursor to select which mix to set and press 

ENTER

. 

The top line will show the mix number, with the cursor over 

the input channel, and the output channel to the right. Press 

ENTER

 and 

 or 

 to highlight and set the input channel. 

The rate of the input channel to mix with the output channel 

can be adjusted for each the right and left side of the input 
channel’s center position. With the cursor next to RATE L, 
set the desired mix percentage. Repeat for RATE R. Note 
the curve on the display’s graph will adjust according to the 
percentages entered.

The amount of the input channel to be mixed can be offset by setting a percentage next 

to “OFFSET”.

Assign a switch to control the mix in the CTRL line as explained earlier. Repeat the above 

procedures for each of the four mixes that are to be confi gured.

AIR BRAKE SET

ELEV:   0%

AILE:   0%

CTRL:SE

AIR BRAKE SET

ELEV:   0%

AILE:   0%

FLAP:   0%

CTRL:SE

PROGRAMMABLE MIXER

Mix1: --->---  --INH

Mix2: --->---  --INH

Mix3: --->---  --INH

Mix4: --->---  --INH

Mix1:--->---

:

:

:

:

RATE L

R

OFFSET

CTRL  

0%

0%

0%

INH

Содержание TACTIC TTX650

















































Отзывы:

Нет отзывов

Похожие инструкции для TACTIC TTX650

Canon imageRUNNER ADVANCE C9075S PRO User Manual preview
imageRUNNER ADVANCE C9075S PRO
Бренд: Canon Страницы: 20
D-Link DSN-640 Quick Installation Manual preview
DSN-640
Бренд: D-Link Страницы: 40
Eaton PKE-COM-RTU Instruction Leaflet preview
PKE-COM-RTU
Бренд: Eaton Страницы: 2
Eaton i-on30R Installation Instructions preview
i-on30R
Бренд: Eaton Страницы: 2
Eaton MEMSHIELD 4 Installation Instructions Manual preview
MEMSHIELD 4
Бренд: Eaton Страницы: 8
Fantech ECO-TOUCH Operating Manual preview
ECO-TOUCH
Бренд: Fantech Страницы: 2
halstrup-walcher PSD4 Series Instruction Manual preview
PSD4 Series
Бренд: halstrup-walcher Страницы: 39
K9Safety K9Caller Configuration Manual preview
K9Caller
Бренд: K9Safety Страницы: 9
Yamaha RCX240 Supporting Supplement Manual preview
RCX240
Бренд: Yamaha Страницы: 92
NAiS FP2 Technical Manual preview
FP2
Бренд: NAiS Страницы: 144
Parker CK5-DN Quick Start Manual preview
CK5-DN
Бренд: Parker Страницы: 4
M-system R5-TS Instruction Manual preview
R5-TS
Бренд: M-system Страницы: 3
Inkel IRG-8116 Operation Manual preview
IRG-8116
Бренд: Inkel Страницы: 12
Advanced Lux Intelligent Product Manual preview
Lux Intelligent
Бренд: Advanced Страницы: 62
intech 21 OPLC-2100 Operation Manual preview
OPLC-2100
Бренд: intech 21 Страницы: 15
Xsens MTi 600 Series Hardware Integration Manual preview
MTi 600 Series
Бренд: Xsens Страницы: 17
Znshine Solar ZXM6-72M Mounting Manual preview
ZXM6-72M
Бренд: Znshine Solar Страницы: 16
National Instruments Phase Matrix PXI-1420 Quick Start Manual preview
Phase Matrix PXI-1420
Бренд: National Instruments Страницы: 38

Бренды по названию

Популярные бренды

Загрузить еще бренды