3
Hobbes
POEfinder
Power over Ethernet Status Finder
© Copyright Hobbes GmbH
Instructions for Operation
Step 1: Connect the plug side of the Hobbes PoEfinder to an active
network outlet or connect to the Hobbes PoEfinder jack via network
cable.
Step 2: In a few seconds, the LEDs will indicate the PoE voltage (48V) if
detected or not. It will display the voltage detected on pair 12-36,
or 45-78.
Note: If an unsolicited voltage > 24VDC existed on the network, the
Hobbes POEfinder will immediately light “on” without delay.
Caution:
Please do not connect this device to a telephone network. If the detected
voltage is over 63VDC, it may permanently damage the unit.
Item no.: 256300
Made in Taiwan
