06
Operation instructions
Step1
Lift up the front dustproof and insert the fiber
cable to the universal connector.
Step 2
Push power button to turn power on. A visible
650nm wavelength red laser will be visible
through the fiber optic cable. (If batteries are
low, the unit will not emit a visible red laser
output signal. Battery replacement is necessary).
Step 3
The output signal can be CW or 1Hz pulse
mode. When powering on the unit, the output
signal will be either CW or 1Hz pulse mode.
If the unit is on CW mode, the unit will enter
1Hz modulation mode on next power cycle.
