INSTRUCTION MANUAL FOR DISHWASHERS
7
GB
4.6.2 Machine with drain pump
¾
Turn off the machine.
¾
Remove the integral filter (
Fig.6
) and extract the overflow (
Fig.8
).
¾
After closing the door, press the
DRAIN PUMP ACTIVATION button (2)
until you hear the drain cycle start. The
CYCLE
light
(6)
flashes .
¾
The machine turns off when draining is complete.
If necessary, extract the tub filter and clean (
Fig.7 C
).
4.7
End of service
•
At the end of the day always drain the machine as described in the
“Machine draining” section.
•
Disconnect the power supply by means of the main switch and close the external water
cock.
•
Perform routine maintenance and clean the machine as described in the “Maintenance” section.
If possible, leave the door ajar to prevent the formation of unpleasant smells inside.
Chap 5
MAINTENANCE
Completely empty the machine as described in the paragraph “Machine Emptying”,
turn off the electricity with the main external switch and close the external water
valve before starting any maintenance operation.
5.1
Cleaning and hygiene
To guarantee machine hygiene
the routine (daily), weekly and yearly maintenance operations
indicated below must be regularly performed. Also carry out a periodical sanitising treatment with
suitable non-corrosive products available on the market.
5.2
Filtering group and machine maintenance
Carry out this procedure at the end of the day when you see residual dirt on the filters:
1. Remove and clean the baskets.
2. Remove the tub as per the instructions in the paragraph on draining the machine.
3. Carefully clean the integral filter.
4. Thoroughly clean the tank and machine with non-abrasive disinfectant products.
5. Remove the standard filter by pulling it upwards as shown and clean it carefully.
6. Do not use abrasive products or objects for cleaning the steel tank. Instead use a slightly
soapy damp cloth.
7. Do not use pressurised jets of water because they could damage the electric system.
8. When finished with the described tasks, carefully reposition each part.