Hobart 1776, Руководство пользователя, Страница: 8 / 20

OM-281996 Page 6
3-3. Lens Delay Control
Place Weld/Grind mode switch
in Weld position (Section 3-6).
1 Lens Delay Control
The lens delay control is used to ad-
just the time for the lens to switch to
the clear state after welding.
The delay is particularly useful in
eliminating bright after-rays present
in higher amperage applications
where the molten puddle remains
bright momentarily after welding.
Lens delay adjusts from min (0.1
second) to max (0.9 second).
1
3-4. Variable Shade Control (No. 9–13)
Place Weld/Grind mode
switch in Weld position (Sec-
tion 3-6).
1 Variable Shade Control
(No. 9–13)
Use the control to adjust the lens
shade in the darkened state. Use
the table in Section 1-4 to select
proper shade control setting
based on your welding process.
Start at the highest setting and
adjust lighter to suit the welding
application and your personal
preference.
1