© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL https://www.intesis.com
Rev.1.0
2 / 2
Enclosure
Plastic, type ABS (UL 94 V-0)
Net dimensions (dxwxh): 71x71x27 mm
Color: White. RAL 9010
Mounting
Wall.
Power
Supplied through KNX bus. See on KNX Port.
KNX Port
1 x KNX TP-1 Plug-in screw terminal block (2 poles)
2500VDC isolation from other ports
KNX power consumption: 20mA
Voltage rating: 29VDC
Port A
1 x Serial EIA485 Plug-in screw terminal block (3 poles)
A, B, SGND (Reference ground or shield)
1500VDC isolation from other ports
Push Button
Sets device in programing mode in KNX network
Operation
Temperature
0°C to +60°C
Operational
Humidity
5 to 95%, no condensation
Configuration
Jumpers
3 x Jumpers for serial EIA485 configuration:
Jumper 1:
Connected:
120 Ω termination active.
Disconnected:
120 Ω termination inactive.
Jumper 2 & 3:
Connected:
Polarization active.
Disconnected:
Polarization inactive.
LED Indicators
3 x Onboard LED indicators
2 x Port A TX/RX
1 x KNX Prog Mode
ELECTRICAL & MECHANICAL FEATURES
This marking on the product, accessories, packaging or literature (manual) indicates that the product contains electronic
parts and they must be properly disposed of by following the instructions at
https://intesis.com/weee-regulation