HMS eWON FLC 3701, Руководство по установке, Страница: 7 / 18

Safety, Environmental & Regulatory Information 5 (16)
3 Safety, Environmental & Regulatory
Information
3.1 Scope
The present heading addresses Safety, Environmental & Regulatory Information about the FLC
3701 - MPI extension card.
This extension card belongs to the same compliance frame than the Flexy 205. In the present
case of a telecommunication extension card, additional directives, standards and instructions
apply.
3.2 ESD Damage Prevention
Always use ESD precautions when handling extension cards and / or opened base
unit as they contain parts and assemblies susceptible to be damaged by
electrostatic discharge (ESD).
The extension card described in this document is a module exposing both sides of an electronic
printed circuit board. Therefore, it is packed in an antistatic ESD bag. In order to avoid ESD
damage, the product must be handled with the necessary precaution including:
• Grounded ESD protective work surface
• Personnel grounding
3.3 Applicable Directives, Standards and Compliances
The extension card described in the present document belongs to class A Information Technol-
ogy Equipment (ITE). In a domestic environment this product may cause radio interference in
which case the user may be required to take appropriate measures.
3.3.1 Applicable European Directives
The FLC 3701 - MPI extension card is in conformity with the following EC directives:
• RoHS Directive 2011/65/EU
• EMC Directive 2014/30/EU
3.3.2 Applicable Safety Standards
The FLC 3701 is in conformity with the following safety standards:
• IEC / EN 60950-1
• UL 60950-1
• CSA-C22.2 No 60950-1-07
3.3.3 FCC Compliance
The FLC 3701 complies with Part 15 of the FCC Rules. Operating is subject to the following two
conditions:
• This product may not cause harmful interference
FLC 3701 - MPI Extension Card Installation Guide IG-0029-00 1.1