background image

                                                                                                                        

 

AB7609 Installation Guide

 

9

© 2005 HMS Industrial Networks.  

Warranty

HMS Industrial Networks AB warrants all new products to be free of defects in material 
and workmanship when applied in the manner for which they were intended and accord-
ing to HMS Industrial Networks AB’ published information on proper installation. The 
Warranty period is one year from the date of shipment.

HMS Industrial Networks AB will repair or replace, at its option, all products returned to 
it freight prepaid, which prove upon examination to be within the Warranty definitions and 
time period.

Limitation of Liability.

 

 

EXCEPT AS EXPRESSLY PROVIDED HEREIN, HMS INDUSTRIAL
NETWORKS AB MAKES NO WARRANTY OF ANY KIND, WHETHER
EXPRESSED, IMPLIED, STATUTORY, OR OTHERWISE. HMS INDUSTRIAL
NETWORKS AB SPECIFICALLY DISCLAIMS ALL IMPLIED WARRANTIES
OF DESIGN, MERCHANTIBILITY, FITNESS FOR A PARTICULAR PURPOSE, 
TITLE AND NONINFRINGMENT. THESE LIMITATIONS SHALL APPLY
NOTWITHSTANDING THE FAILURE OF ESSENTIAL PURPOSE OF ANY
LIMITED REMEDY PROVIDED IN THIS AGREEMENT.  NO AGENT OF HMS
INDUSTRIAL NETWORKS AB IS AUTHORIZED TO INCUR WARRANTY
OBLIGATIONS ON BEHALF OF HMS INDUSTRIAL NETWORKS OR TO
EXPAND OR MODIFY THE LIMITATIONS SET FORTH HEREIN. 

IN NO EVENT WILL HMS INDUSTRIAL NETWORKS AB OR ITS SUPPLIERS
HAVE ANY LIABILITY TO BUYER FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES HOWEVER 
CAUSED AND UNDER ANY THEORY OF LIABILITY (WHETHER IN
CONTRACT, TORT (INCLUDING NEGLIGENCE), INDEMNITY OR
OTHERWISE) WHETHER OR NOT HMS INDUSTRIAL NETWORKS AB HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.   

IN NO EVENT WILL HMS INDUSTRIAL NETWORKS AB OR ITS SUPPLIERS
HAVE ANY LIABILITY TO THE BUYER FOR ANY LOST PROFITS, LOSS OF
DATA, LOSS OF USE, OR COSTS OF PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES, EXCEPT IN CASES OF WILLFUL MISCONDUCT BY
HMS INDUSTRIAL NETWORKS AB. 

Содержание Anybus-X AB7609












Отзывы: