HMS-VILGO VERTIC 2, Руководство пользователя

Страница: 17 / 20

17
VERTIC 2 user guide Version 07/2020
Cleaning of the Vertic 2:
Before any intervention on the Vertic2 , disconnect it from the power and take out the control box.
Follow this cleaning protocol.
5.2 ANNUAL MAINTENANCE
We recommend a complete annual check up on this type of device. Please find on page 9-12 the summary of
the necessary controls and checkups you need to perform on the hoist; as well as the maintenance sheet to
log in all interventions.
5.3 WARRANTY
Your Vertic2 hoist has its own serial number. This number is on a label on the chassis and is repeated on
every electrical part. To make a claim using the warranty, you need to return the faulty part, with its serial
number label to your retailer who will contact us.
The warranty of this product is valid for 5 years (except battery: 1 year).
ANY RETURN WITHOUT SERIAL NUMBER LABEL WILL NOT BE COVERED BY THE WARRANTY.
The warranty does not cover any breakdown due to inappropriate or wrong use or maintenance, in spite of the
specifications and use instructions stated in this manual. (electrical shock, torn cables etc.)
Warranty does not cover any breakdown or malfunction due to parts being swapped over or replaced with
used or unapproved parts.
5.4 RECYCLING
Recycling must be done according to the type of materials and components and in compliance with the
current recycling regulations. Disposal and destruction of the faulty parts must be handled by an agreed
recycling company.
1-Use a non-woven fabric and a relevant
cleaning solution (ANIOS DETERGENT
DESINFECTANT SURFACES HAUTES
Or any similar product).
Apply the indicated dosage.
2-Clean all surfaces.
3-Let dry.
WARNING:
-Do not splash water onto the device
- Do not use high-pressure cleaning
STRICTLY FORBIDDEN:
-pure alcohol (PA)
-Acetone
- tetrachloroethylene and trichlorethylene
-any type of solvants
-abrasive cleaning products
-any type of wax