18 (36)
7.2
Creating New Configurations
To use more functions of the CANnector Log, logger configurations can be created with the
freeware ACT tool. Basically two logger configuration types can be created: logger without bus
description files (log messages) and logger with bus description files (log individual signals).
For example the following functions can be used with the CANnector Log:
•
logging of defined messages of a CAN bus
•
trigger on defined messages
•
import bus description files for the CAN busses
•
trigger on signal values
•
log to a ring buffer and log when a trigger occurs (with the possibility of a pre-trigger)
7.2.1
Creating a Configuration without Bus Description File
Logger configurations without bus description files provide the possibility to log complete
messages and to trigger for defined messages as well as excluding individual messages from
logging.
►
Make sure, that the required software is installed (see
) and that
the CANnector Log is connected (see
►
Start the ACT tool.
►
Open menu
File
and select
New
.
→
Wizard to create a new logger project is opened.
Fig. 14
ACT wizard
►
Select the project template
Logger without Bus Description
and click button
Next
.
CANnector Log User Manual
4.01.0091.21000 1.1 en-US
