Intesis
TM
BACnet Server
– PROFINET
User Manual r1.0 eng
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
URL
http
s
://www.intesis.com
38 / 46
Connection to PROFINET
Connect the communication cables coming from previous and next device in the PROFINET network, using a line or
ring topology. When ring topology is used, a device must take over the function of the ring manager (MRM). See
section 6.4 Media Redundancy Protocol (MRP) for more details. If only one Ethernet connection is needed (e.g., last
device in a line topology), either Port 1 or Port 2 can be used.
The cable to be used shall be a straight Ethernet UTP/FTP CAT5 cable.
PROFINET interface contains a dual port Ethernet switch, they both operate at 100Mbit, full duplex, as required by
PROFINET.
Pin no.
Description
1, 2, 4, 5
Connected to chassis ground over
serial RC circuit.
3
RD-
6
RD+
7
TD-
8
TD+
Housing
Cable Shield
Connection to the configuration tool
This action allows the user to have access to configuration and monitoring of the device (more information can be
found in the configuration tool User Manual). Two methods to connect to the PC can be used:
•
Ethernet:
Using the Ethernet port of Intesis.
•
USB:
Using the console port of Intesis, connect a USB cable from the console port to the PC.