Check Card Detection on the Embedded Web Page
16 (18)
6
Check Card Detection on the Embedded Web Page
The Flexy extension cards require no software configuration. They are automatically detected by
the base unit when the device boots.
6.1
Connecting to the Embedded Web Server
Configure the network parameters to set the computer being used to reach the web interface on
the same IP range than the LAN of the Ewon device.
Once both devices are in the same IP range, connect the PC to one of the LAN port of the Ewon
device.
Open an Internet browser and access the homepage of the Ewon device by typing the LAN IP
address in the URL field (the default address is
http://10.0.0.53
).
A dialog box will pop-up asking for credentials. Default ones are:
•
login: adm
•
password: adm
For security reasons, changing the default password
adm
is an absolute requirement. To
change it, from the menu bar, click on
Setup > Users
and double click on the
adm
entry to
edit and save its password.
6.2
Detected Cards Displayed in the System Page
Once connected to the embedded web pages of the Ewon device, the homepage displays the
system status including detected extension cards.
To access in details the system status summary, click on
Diagnostic > Status > System Info >
System
.
Single Ethernet Ext. Card FLX3101 Installation Guide
IG-0017-00 1.5 en-US
