Safety, Environmental & Regulatory Information
6 (30)
The Ewon Cosy 131 is designed to work with an indoor antenna. It is the customer’s
responsibility to take all the necessary additional precautions in case the antenna is being
extended to an external use with exposure to TNV voltages.
3.3.4
FCC Compliance
The product described in the present Installation Guide complies with Part 15 of the FCC Rules.
Operating is subject to the following 2 conditions:
•
This device may not cause harmful interference
•
This device must accept any interference received, including interference that may cause
undesired operation.
3.3.5
Certifications
The product described in the present Installation Guide complies with part 15 of the FCC Rules.
Operating is subject to the following 2 conditions:
•
UL Certificate Of Compliance (CoC) for Ordinaty Locations #E350576 for a TMRA of 70°C
•
CB Certificate #DK-72992-UL
These certificates can be downloaded as PDF files on the
3.4
Field Implementation & Environmental Conditions
3.4.1
General Restriction
This equipment is not suitable for use in locations where children are likely to be present.
3.4.2
Ingress Protection
The Ewon Cosy 131 has an IP20 protection grade.
Therefore, the Ewon Cosy 131 is
NOT
suited for outdoor mounting. It has to be integrated in an
electrical cabinet, protected from excessive heat, humidity and dust.
Do not push any sharp object into the air vents or openings of the equipment.
3.4.3
Mounting Recommendations
The product is intended to be mounted vertically, label on the right side.
The normal mounting position of the Ewon Cosy 131 is to be mounted on a horizontal
Omega type DIN-rail (EN 50022)
.
•
Mounting the unit on DIN-rail
Pull the slide lock (located at the bottom of the back-side of the unit) downwards and
present the unit in front of the DIN rail. Tilt the Cosy 131 upwards in order to hang it on the
upper edge of the DIN rail by its hook. Gently tilt the unit downwards until it finds its
original position. Pull the slide lock upwards to fix and lock the unit on the DIN rail.
•
Removing the unit from DIN-rail
Release the unit by pulling the slide lock downwards while gently tilting the unit upwards.
Free the unit by unhooking it from the upper rail edge.
Ewon Cosy 131 Installation Guide
IG-0022-00 2.8 en-US
