13
III. Setup & Operating procedures
Installing batteries
The meter uses two CR 2032 3V Lithium
batteries. Batteries will normally last for
aprox. 3000 tests. Other types of CR 3V
lithium batteries are also acceptable, yet
the capacity of test times may differ. In-
stall the batteries when you first use the meter or replace with new
batteries when the “LP” message and the low battery symbol appear
on the LCD display. Open the battery lid on the back side of the
smartLAB
®
mini
meter and insert batteries with plus sign to top.
First insert the battery on the right side and then press the left side
down until it clicks. Close the battery lid.
Note:
1. Remove the batteries when you will not be using the meter for
one month or longer.
2. Values won’t be deleted when the batteries are replaced.
Meter, batteries, lancets, test strips etc. must be disposed of
according to local regulations at the end of their usage.
Low battery symbol
