INSTRUCTION MANUAL
ART.-NO.: 4612112 | 4612212 | 4612312 | 4612412 | 4612512 | 4612812
© Holthoff Trading GmbH
HMF
.DE | [email protected]
7. Automatic Lock
Three continuously wrong entries will activate the warning beep for 20 seconds. During the 20 seconds you cannot open
the vault with a code. Please use the emergency key. If the wrong code is entered three times again, a warning beep will
sound for 5 minutes. To stop the warning tone and open the safe, please use the emergency key and remove the
batteries.
8. Wall mounting
Choose a suitable place to mount your key safe on the wall.
8.1 Drill holes for the dowels at the desired location.
8.2 Insert the dowels into the pre-drilled holes and secure the vault with appropriate screws.
Attention!
If you want to attach the vault to a concrete wall, use the expansion bolts. For mounting on a wooden wall,
use the clamping screws. If necessary, use your own fixing material which is suitable for your installation location.
ISSUES
CAUSE / HANDLING
The opening mechanism is sluggish or the
vault opens only sometimes or not at all.
Weak batteries / Please open the safe with the emergency key and
insert new batteries. ATTENTION! Please note
2. Inserting the
batteries
! The code has to be restored.
The green and red LEDs light up
simultaneously, the safe will not open.
Weak batteries / Please open the safe with the emergency key and
insert new batteries. ATTENTION! Please note
2. Inserting the
batteries
! The code has to be restored.
When pressing the buttons no sound is
heard.
Weak batteries / Please open the safe with the emergency key and
insert new batteries. ATTENTION! Please note
2. Inserting the
batteries
! The code has to be restored.
When pressing the buttons no LEDs light
up.
Weak batteries / Please open the safe with the emergency key and
insert new batteries. ATTENTION! Please note
2. Inserting the
batteries
! The code has to be restored.
The door is warped, the vault closes
hardly.
Please adjust the safe door with using an Allen key.
The safe opens with any code or, the
stored code is not working.
The batteries may have been changed and you haven’t stored a new
code. Please open the safe with the emergency keys and store a
new code as describe under
3. Storing the personal code
.
Figure 4
