HME 800.919.9903 ServerCall ® Paging System
Page 4
©HME WIRELESS, INC. 2012
How the system works:
Write the server’s name next to their pager number with a Dry Erase Marker (one is
included with your system. Warning: regular ink will make permanent marks, making name
changes difficult
– clean with a non abrasive cleaner ONLY!).
Press the number that corresponds to the server’s name on the sending unit and that
pager will silently vibrate. Range of this system should easily cover even the largest of
restaurants. You can send a single, double or triple vibration to servers, sending them to
different parts of the kitchen.
For example: 1 vibe means go to the hot line, 2 vibes means go to the salad station, etc.
To page a pager with a single vibe
press the corresponding number until the unit beeps once
and the green light comes on.
Pager will vibrate once when it receives the page.
To page a pager with a dual vibe
, press the x2 button once and then press the corresponding
server / pager number within 5 seconds.
Pager will vibrate twice when it receives the page
.
To page a pager with a triple vibe
, press the x3 button once and then press the corresponding
server / pager number within 5 seconds.
Pager will vibrate 3 times when it receives the page
.
Re-page Feature:
You may select to have this system page the server one time only or repage them 3 times if the
food has not been picked up. (See programming instructions.) The system can also notify the
manager on an optional digital pager with the tardy server’s pager number.
To cancel a page:
Press the corresponding number on the transmitter (or cancel panel) until it beeps once and the
light goes off. If you do not cancel the page, and the repage feature is turned on, the pager will
repage the server 3 more times automatically every 60 seconds (this feature is adjustable). The
transmitter will change from green (food up for 1 minute) to yellow (food up for 2 minutes) to red
(food up for 3 minutes) and flashing red (food dying in the window!). At that point the system can
page
the manager’s pager with the server number notifying him that there is food up in need of
attention.
To page All Server pagers,
press and hold the
All Page
button until it stops beeping and
flashing (5 seconds) and you hear a single short tone. All pagers will vibrate 4 times.
To page All Manager Pagers
, press and hold the
MGR All
button until it stops beeping and
flashing (5 seconds) and you hear a single short tone. This button only works if you have
purchased the optional manager display pager.
