HME JTECH ISTATION 4400RF PLL, Руководство по программированию, Страница: 4 / 6

IMPORTANT:
DO NOT plug the power adaptor into the IStation
while programming the RF board.
1. Having the side with mark/green
dot/arrow label facing you, push down the
jig pins firmly on the contacts.
2. To see programmed baud-rate and
frequency click on the “Read” button or
Shortcut Key: F1 (a window with the
information will pop up).
3. Select the desired Baud rate and Frequency,
Click the “Write” button (or Shortcut Key:
F2) to program the baud-rate and
frequency.