21
8
Beltpac range is bad.
●
Be sure antennas are properly connected and tightened on base station .
●
Be sure base station is positioned where there are no physical obstructions blocking line-of-sight from the
base station to your sideline .
9
Beeping is heard in base station headset and SELECT lights are blinking.
●
Base station is operating on battery power, and the battery is low .
10
Not all beltpac buttons are working.
●
Button functions may have been changed to work in the desired operating mode (see
page 13
) .
11
There is interference from a cordless telephone.
●
If there is a 2400MHz cordless telephone nearby, interference may occur .
●
If it does occur, changing frequencies on the telephone should eliminate the problem .
●
If it does not, move the phone as far as possible from the base station, or use another type phone .
(If your base station does not have a battery backup)
In the event of an electrical power outage,
such as from lightning or a power generator failure, if you
experience problems with your DX340|HD equipment after the power comes on again, unplug the AC
power supply from its electrical outlet and wait 15 seconds, then plug it back in .
