
22
Operating Mode Setup
Set up beltpacs and/or all-in-one headsets to operate in the desired mode by
pressing and holding the button combinations shown below when you press
the PWR (power) button to turn the unit on.
Mode
Button Combination
Button Functions
(default) Hold
X
+
O
+
ALL
and press
PWR
X
= X-channel only
O
= O-channel only
ALL
= both X and O channels
O-channel only
Hold
O
and press
PWR
X
&
O
both = O-channel
ALL
has no function
O-c ALL
Hold
O
+
ALL
and press
PWR
X
&
O
both = O-channel
ALL
= both X and O channels
X-channel only
Hold
X
and press
PWR
X
&
O
both = X-channel
ALL
has no function
X-c ALL
Hold
X
+
ALL
and press
PWR
X
&
O
both = X-channel
ALL
= both X and O channels
O-c X-channel only Hold
X
+
O
and press
PWR
X
= X-channel only
O
= O-channel only
ALL
has no function
Latching
(Hands-Free, Full-Duplex)
Hold
ALL
+
▲
and press
PWR
X
&
O
will latch on when pressed and
released, for a normal two-way
conversation
Push-To-Talk (PTT)
Hold
ALL
+
▼
and press
PWR
X
,
O
&
ALL
must be pressed and held
while you talk, and released to listen
NOTE:
Mode settings will be stored, so your beltpacs and/or all-in-one headsets will have
the same mode settings after you turn them off and back on.
NOTE:
ALL does not latch on, and must be held down to hear both O and X.