HME Clear-Com RM-704, Инструкция по эксплуатации

Страница: 12 / 46

M S - 7 0 4 / R M - 7 0 4 F O U R - C H A N N E L M A I N / R E M O T E S T A T I O N S
1 - 6
If several channels are being listened to at the same time, it might be desirable
to adjust the individual listen levels of each channel for the desired mix.
Talking on Intercom Channels
To talk on an intercom channel, press the desired talk button. Pressing and
holding the button will cause the function to be active only while the button is
held (
momentary ). Pressing and releasing the button quickly will cause the
function to latch on if it was off or turn off if it was on ( latching ).
The latching function can be defeated on an individual channel with an option
DIP switch beneath the access panel (
latch disable DIP switch).
The button will be illuminated blue when the talk function is off and amber
when the talk function is on.
Another option allows the automatic setting of a listen function whenever a
talk is active ( auto-listen DIP switch) for each channel.
The All-Talk Function
Pressing the button marked all talk sends the selected microphone to all
channels while the button is pressed ( momentary only). This button lights
amber when pressed.
Monitoring Main Program
The main program input is the one on the XLR connector on the rear panel.
To listen to the main program in the speaker or headphone, adjust the program
level control just below the link and all talk pushbuttons.
Sending and Receiving Call Signals
To send a call signal on an intercom channel press the call button for that
channel. This is a momentary function.
If the auto-call option is selected for that channel, activating a talk button will
also send a call to that channel.
Receiving a call signal is indicated by a flashing red call button.
Linking Intercom Channels Together (MS-704)
A pushbutton allows the connecting of intercom channels B, C, and D to
channel A. The
link pushbutton is latching in action. The link button
illuminates amber when all channels are linked together. In the latched
position, the entire station operates as one party line.
Talk and listen buttons are non-functional on channels B, C, and D when they
are linked to channel A.
The Announce Function
A single pushbutton sends the active microphone’s audio to the announce
output on the rear panel. Any active talks are disabled while the announce
button is held. The announce button illuminates amber when held.
Talk and