HME Clear-Com Encore MS-702, Инструкция по эксплуатации, Страница: 19 / 32

C l e a r - C o m ®
M S - 7 0 2 T w o - C h a n n e l M a i n S t a t i o n I n s t r u c t i o n M a n u a l
2 - 1
INSTALLATION
1. Unpack the unit and inspect for any damage that may have occurred in
shipping.
2. Connect the proper AC mains cable.
3. Install the MS-702.
Note: For additional information, refer to the Clear-Com System
Installation Manual.
4. Connect the AC to the mains circuit.
Note: Information on the mains power requirement is given on the
underside of the unit.
5. Connect the intercom lines.
6. Set the two termination switches on the rear panel to
on .
7. Set the option switches to the default (up) position.
8. Switch power on .
The blue talk button lights should be on and the two red short lights
should be off .
9. Set listen levels and sidetones.
Refer to the listen level and sidetone setting topics in the Operation sec-
tion of this manual.
10. The intercom system should now be operating properly.
Read the rest of this manual for further information.