HME 6700HD, Руководство по установке

Страница: 35 / 68

EQUIPMENT INST
ALLA
TION
28
Bridge Power Up
1. Power on the Bridge, and wait 20 seconds for a full boot up.
2. Connect to the Bridge Website.
3. Click on
Devices.
A list of bases should not be displayed. The bases should still be powered off.
4. Power up base 1, wait 15-20 seconds then click on
Devices
to refresh the page. The first base
should show as
ONLINE
. Once listed as online, repeat for each base.
5. Watch each base status screen, and wait for
NDP
to change from “–” to “
✔
”, and then continue to
power up the next base.
Examples displayed below:
Base 1 powered on and connected
a) If you’re connected to the Bridge
via USB
, enter
192.168.7.2
in your
browser’s address bar to view the Sonic Bridge website.
b) If connected
via Ethernet
, enter “
http://10.xx.xx.2
” in the browser’s
address bar. The middle two octets are the store number (ex:
Store 1392
has
the address
10.13.92.2
). The Sonic Bridge website will appear on-screen.
c) No information will be displayed in the
Baseline
section at this time.
Sections
1 2 3 4 5 6 7 8 9 10 11 12