7
6
5. Press the PLAY button on the device or the remote control to play and again to pause.
6. To skip forward and backward through tracks, press the FORWARD and REVERSE buttons on the
device or the remote control.
7. To turn the unit OFF, press the POWER button. Note: For your convenience, your device will
continue charging on the dock while the unit is plugged in, even if the power is turned off.
Sending Movies & Videos from your iPad/iPhone/iPod touch to an external video source
(Fig. 1-3)
1. Press the POWER button, located on top of the unit, to turn ON.
2. Open the dock door(s). To play iPod touch or iPhone only the center door needs to be opened. To
play the iPad, open both dock doors.
3. Fit iPad/iPod/iPhone carefully onto the docking pin.
Please Note:
•
If docking an iPad, be sure to pull up on the stabilizing drawer on the back of the unit
to add stability when the iPad is docked.
• To avoid damage, do not force the device onto the docking pin.
WARNING: The dock connector is designed for Apple iPad, iPhone, and iPod devices.
Attempting to attach a non-iPad/iPhone/iPod music player will damage or destroy your
device and/or the product.
4. Press the SOURCE button on the unit or on the remote control until the iPod icon appears on the
display.
5. Connect a standard AV cable (not included) to the back of the unit and connect the other end to
the external video source (TV, projector, etc.)
6. Select the desired video or movie on the device and press play.
7. Once the video begins playing, hold the PLAY button on the unit or on the remote control down for
five seconds.
•
If playing from the iPad
, the video will stop playing on your device and will return to the opening
screen of the video. Press the play button again on the unit, the remote or the iPad and the video
will be sent to the external video source.
•
If playing from the iPhone or iPod touch
, the video will stop playing on your device and will
return to the main movie/video list on your device. Press PLAY/PAUSE on the remote or press
the desired video again from the list on your iPhone/iPod touch and the video will be sent to the
external video source.
8. To return your movie or video back to your iPad/iPhone/iPod, press the PLAY/PAUSE button again
on the unit or the remote.
9. Press and hold the PLAY/PAUSE button for five seconds. The screen of your device will then show
the movie/video homescreen. Press PLAY/PAUSE on the device, the unit, or the remote control
and the video will stop playing on the external video source and will resume play on your device.
Listening to a non-docking iPod or other portable audio devices
(Fig. 1-3)
1. Using the 3.5mm audio cable (not included), plug in the device via the LINE IN input located on the
back of the unit.
2. Plug the other end of the audio cable into the LINE OUT or headphone jack of the device.
3. Press the POWER button located on top of the dock or on the remote control.
4. Press the SOURCE button on the unit or on the remote control until the AUX icon appears on the
display.
5. Press play on the connected device.
NOTE:
You may need to adjust the volume on the device to achieve proper volume.
6. Press the POWER button to turn unit off.
Remote Control
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT.
12/24
TIME
ZONE
MUTE
SOURCE
DST
2
1
z
z
z
Power
Open/Close Dock
(Fig. 3)
Mute
Alarm 1 Set
Alarm 2 Set
Volume Up
Time/Alarm Adjust Up
Volume Down
Time/Alarm Adjust Down
Next Track
Play/Pause
Time Zone Adjustment
12/24 Hour Clock Set Time
Source
Time Set
Last Track
Daylight Savings
Snooze
