4
5
Turning Off the Alarm/Snooze Operation
1. Press the SNOOZE bar and the alarm will stop and sound again in nine minutes.
Note: You may only press the SNOOZE button during the alarm mode for one hour
(6 times). After the sixth time, the alarm will turn off and will not sound again until the
next set time.
2. To turn off the alarm, press the (ALARM 1 or ALARM 2) button on the top of the unit.
Listening to your device wirelessly over Bluetooth
®
To connect to Bluetooth:
1. Press the POWER ( ) button
2. Press the SOuRcE button on top of unit until “BT” icon image appears on the LcD.
3. Follow the instructions of your device to pair the unit.
4. Select JAM Zzz from your Bluetooth
®
listings on your device or selecting YES. Jam
Zzz will sound a hint tone once pairing has occurred.
5. Press play on the connected device.
NOTE: You may need to adjust the volume on your device to achieve proper volume.
NOTE: When pairing with a computer, please consult your computer manufacturer for
Bluetooth
®
pairing instructions and/or the latest Bluetooth
®
drivers.
Listening to a non-Bluetooth
®
audio device
1. Plug a 3.5mm audio cable (included), into the Aux audio line input located on the
back of the unit.
2. Plug the other end of the audio cable into the line out or headphone jack of your
audio device.
3. Press the POWER button ( ).
4. Press the SOuRcE button until the Aux icon appears on the display.
5. Press play on the connected device.
NOTE: You may need to adjust the volume on your device to achieve proper volume.
NOTE: Track and controls will not function when using Line-In Audio Jack.
Listening to the Radio
Note: For best reception, fully extend the wire antenna. DO NOT strip, alter or attach to
other antennas.
1. Press the POWER button ( ).
2. Press the
SOuRcE
button until FM and station frequency appears on the display.
3. use the buttons to select desired station. For auto seek press and hold
for 2 seconds and the tuner will find the next station with the strongest frequency.
4. Press to turn the radio off.
Start Me Up
connect the Ac Adaptor to the back of unit and plug into wall outlet. clock will
automatically default to Eastern Standard Time.
Setting Clock Time – Manually
1. Press TIME SET button on the back of the unit.
2. Select 24 hour or 12 hour display, use the
or
to adjust.
3. Press TIME SET button again to select the hour
using the or to advance the
hour (a PM indicator will display when hour is
advanced accordingly).
4. Press TIME SET button again to select the
minute using the or .
Display Dimmer Control
Press the SNOOZE/DIM/SLEEP bar to adjust the
backlight intensity of LcD.
The power needs to be off to use the dimmer control.
Note:
• There are 4 DIM settings: HIGH, MEDIuM, LOW, and OFF.
• The Jam Zzz is equipped with enhanced DIM features
when dimmer is in OFF setting:
• LcD will illuminate to LOW setting when ALARM
first sounds.
• Once the clock time reachers 9:00 AM the LcD will
illuminate to LOW setting.
• To view the display simply hit any button (except
power or phone) and LcD will illuminate to LOW
setting for 10 seconds.
Setting and Using the Alarms
1. Press and hold (for 2 seconds) the desired alarm button (ALARM 1 or ALARM 2).The
hour will begin flashing.
2. use the buttons (or the ) to adjust the hour, paying attention to the AM
and PM indicators.
3. Repeat steps 1 & 2 to adjust minute, source (radio or beep) and maximum volume
(0-32).
4. Press ALARM button to set each
selection
and to arm the alarm.
NOTE: The alarm cannot be set to the
Bluetooth® source.
NOTE: The JAM Zzz is equipped with gradual
wake. The alarm begins soft and slowly gets
louder. This will ensure a non-jarring wakeup.
Register
Your Product At:
www.hmdxaudio.com
Your valuable input will help us
Alarm 1
snooze
dim
sleep
Source
Alarm 2