- 1 -
- 3 -
- 4 -
FEATURES
BUTTON EXPLANATION
INSTALLATION INSTRUCTIONS
ALARM SETTING FEATURE
HOW TO SET THE ALARM
If the cumulated flow rate exceeds the limit that the user originally set,
the water flow alarm will beep 5 times and the alarm icon on the LCD
display will blink. In this case, change your water purifier filter and reset
the unit.
RESETTING AN ALARM VALUE
1. Power on the unit
2. Press “UNIT/SET” button and the word SET will then appear on the
LCD display.
3. Press the “UP” and “UNIT/SET” buttons simultaneously and hold for
3 seconds to reset the stacked volume used to 00000.
4. Press the “SET” button once again to save. You will hear a beeping sound.
1. Power on the unit.
2. Press the “UNIT/SET” button and hold
for 3 seconds in order to choose
between Liters or Gallons.
3. Press the “UNIT/SET” button and the word
SET
will then appear on the
LCD display. The first digit of the stacked volume used number will
then begin to blink.
4. Press the “SHIFT” button in order to move the cursor between digits
and press the “UP” button to set the desired number.
5. Press the ”SET” button again to save the desired number. You will hear
a beeping sound indicating that the desired number has been saved.
SPECIFICATIONS
Range:
0-99999 Liters / 0-99999 Gallons
0.8-8.0 LPM / 0.2-2.1 GPM
Resolution:
1 Liter (1 Gallon); 0.1 LPM (0.1 GPM)
Sensor Housing Material:
POM (KEPITAL, F20-03-KEP)
Accuracy:
+/- 10%
Fitting:
1/4” ONE-TOUCH Type
Alarm:
Sound over set point
Auto Shut-Off:
After 5 minutes (LCD Display)
Battery Life:
Approximately 2 Years
Battery Type
:
1.5
V x 2 EA (AA SIZE)
Dimensions:
66 x 90 x 63 mm (2.6 x 3.54 x 2.48 inches)
Weight:
7.3 oz (Includes Batteries)
Power “ON/OFF”.
Move the shift button to the right in order to choose digits
when setting an alarm.
Increases the number of the selected digit when setting an
alarm. Press and hold to speed up.
Press both buttons while in normal mode at the same
time and hold for 3 seconds in order to reset cumulated
flow rates.
Accesses the flow rate, “SET” mode, entry and save features.
+
Press and hold both buttons for 3 seconds while in
“SET” mode, in order for cumulated alarm value
to be reset.
+
There are two 1/4” connection fittings
on the unit. The left side fitting is an
entrance for water and the right side
fitting is an exit.
SET
Liters
Liters
LPM
LPM
In
Out
Press and hold for 3 seconds or order to switch measurement
units from liters to gallons and vice versa.
The FM-200 is an easy-to-install flow monitor that enables you to
check and measure flow rates in Liters Per Minute (LPM) or
Gallons Per Minute (GPM).
This product enables users to manage clean water when a water
purifier filter expiration date is set to match the flow rate capacity.
A user can set a specific flow rate limit, and if the flow rate exceeds
the set limit, an alarm will sound along with an icon that will appear
on the display screen.
- 6 -
How to shut off the alarm temporarily:
Turn the power on and press and hold the “ON/OFF” button for 3
seconds, the display will show OFF. The alarm is now shut off and will
not sound even if the flow rate exceeds the alarm value.
Whenever you turn off the unit and turn it back on again, the alarm
will automatically be turned back on.
AUTO LCD ON/OFF
The LCD display will turn off on the unit automatically after 5 minutes.
However, the unit will continue to take flow rate measurements even
while the display if off.
ALARM MUTE
CHANGING THE BATTERIES
When battery life display on the FLM-3 begins to blink and the unit
starts to beep, this will indicate that it’s time to replace the batteries.
How to turn on the alarm:
FEATURES OF THE FLM-3
Open the bottom cover of the device, removed the batteries and insert
new batteries while matching proper positioning. The battery type for
the device is two 1.5V AA Alkaline batteries.
**Caution:
Do not mix and use batteries of different brands. If the
device will not be used for long periods of time, please remove batteries
and store the device.
**
