- 5 -
www.hmdigital.com
FLM-3
FLOW MONITOR
RESETTING THE CUMULATED FLOW RATE
1. Power on the unit.
2. Press the “UP” and “UNIT/SET” buttons simultaneously and hold for 3
seconds.
3. You will hear two short beeps, indicating that the number has been
reset to 0.
If the flow rate goes out of
measurable range, (as in the
diagram above), “OFL” will
appear on the display screen.
If the cumulated flow rate goes
out of measurable range, (as in the
diagram above), “OFL” will appear
on the bottom of the display screen.
HOW TO USE THE FLM-3
1. Insert the 1/4” hose into to the fitting on unit.
2. Remove the battery discharge protection tab which is located on the
bottom of the unit in order to turn the power on.
3. Press the “SET” button and hold for 3 seconds in order to select the
preferred unit of measurement (LPM or GPM).
4. Press the “SET” button and set the desired alarm value by pressing the
“SHIFT” and “UP” buttons.
5. Press the “SET” button in order to save the desired alarm value.
6. The counter on the LCD display will begin to change numbers as
water flows indicating that the unit is in operation.
Liters
Liters
LPM
LPM
Liters
Liters
LPM
LPM
ONE YEAR LIMITED WARRANTY
The Flow Monitor (”FLM-3”), manufactured by HM Digital, Inc.
("the Company") is warranted to the purchaser against defective materials and
workmanship for one (1) year from the date of purchase.
What is covered:
Repair parts and labor, or replacement at the Company's option.
Transportation charges for repaired or new product to be returned to the purchaser.
What is not covered:
Transportation charges for the defective product to be sent to
the Company. Any consequential damages, incidental damages, or incidental
expenses, including damages to property. This includes damages from abuse or
improper maintenance such as tampering, wear and tear, water damage, or any other
physical damage. The warranty does not cover water damage to the FLM-3 due to
parts not securely closed. Products with any evidence of such damage will not be
repaired or replaced.
How to obtain warranty performance:
Attach to the product your name, address,
description of problem, phone number, and proof of date of purchase, package and
return to:
HM Digital, Inc.
ATTN: Returns
5819 Uplander Way
Culver City, CA 90230
U.S.A.
Implied Warranties:
Any implied warranties, including implied warranties of
merchantability and fitness for a particular purpose, are limited in duration to five
years from date of purchase. Some states do not allow limitations on how long an
implied warranty lasts, so the above limitation may not apply to you. To the extent
any provision of this warranty is prohibited by federal and state law and cannot be
preempted, it shall not be applicable. This warranty gives you specific legal rights,
and you may also have other rights, which vary from state to state.
NOTE:
Warranties are product-specific. Third-party products and products deemed
by HM Digital as "accessories" are not covered under warranty. Third-party products
include, but are not limited to, batteries and fittings. Accessories include, but are not
limited to batteries, lanyards and cases.
OUT OF MEASURABLE RANGE
USER’S GUIDE
PROFESSIONAL
WATER
TESTING INSTRUMENTS
- 2 -
LCD SCREEN DESCRIPTION
1. ”SET” Mode icon
2. Volume per minute
3. Battery life indicator
4. LPM icon (liters/min)
5. GPM icon (gallons/min)
1
2
3
4
5
6
7
8
9
10
SET
ALARM
Liters
Liters
Gallons
Gallons
LPM
LPM
GPM
GPM
INSTALLATION INSTRUCTIONS CONT’D
Insert the hose towards the direction
where the arrow points to install.
How to Insert the Hose:
While pressing the grey ring, pull the
hose towards the direction where the
arrow points to separate the hose.
How to Remove the Hose:
6. Liters icon (for liters mode)
7. Gallons icon (for gallons mode)
8. Stacked volume used
9. Alarm icon
10. Counting indicator
(shows sensor is working)
