manualshive.com logo in svg

HLF 2600 F, Руководство по обслуживанию

Поделиться
Скачать
HLF 2600 F Скачать руководство пользователя страница 30

INSTALLATION 

 
HLF  Italian Design 

3-12 

S.M. HLF  2600/3600 F Eng V1-2011 

 
 
Match the hook machine with the panel slot [1], slide downward the panel [2].  
 
Pay attention that the panel be firmly inserted in its proper place. 
 
 

3.2.7.2  Opening the grinder blades 

 
If during the lifetime of the HLF 2600/3600 coffee maker the operator needs to change 
the type of coffee normally used, it will be necessary to open the blades of the grinder 
and repeat the process illustrated at the paragraph 3.2.7. 
 

 

NOTE

 

 

The different qualities of coffee beans available on the market, are different not 
only in taste but also in formula, and this difference requires an accurate 
adjustment of the grinder blades every time the coffee beans have been changed. 

 

 

NOTE 

 

We suggest to make at least 5 coffees before serve the drink to obtain a better result. 
 
 

3.2.8  Frothing the milk 

 
Open the door of the machine and take out the clear pipe from the inside. Pass it 
through the milk tube holder and deep it into the fresh milk bottle, as shown in the 
picture below. 
 

 

Содержание 2600 F



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды