5
SAFETY INSTRUCTIONS
WORK SAFELY – A CAREFUL OPERATOR IS THE BEST INSURANCE AGAINST ACCIDENTS!!
WARNING SECTION [Continued]
•
Hydraulic fluid under pressure can penetrate the skin
and cause serious injury or death. Hydraulic leaks
under pressure may not be visible!
•
If any fluid penetrates the skin, GET IMMEDIATE
MEDICAL ATTENTION!!
•
Wear safety glasses, protective clothing and use a
sound piece of cardboard or wood when searching for
hydraulic leaks. DO NOT USE YOUR HANDS!
•
Before connecting or disconnecting hydraulic hoses,
read your tractor or power unit’s operator’s manual for
detailed instructions on connecting and disconnecting
hydraulic attachments.
•
Make certain all parts meet the specifications for this
product when installing or replacing hydraulic hoses or
fittings.
•
After connecting hydraulic lines:
Slowly and carefully raise the loader and cycle the
rollback / dump cylinders to check hose
clearances and to check for any interference.
Operate the hydraulics on this product to check
hose clearances and to check for any
interference.
Make certain that the hoses cannot interfere with
or actuate the quick-attach mechanism.
Make certain that hoses will not be pinched, or get
tangled, in any equipment.
•
Do not lock the auxiliary hydraulics of your power unit
in the “ON” position.
•
Refer to your power unit’s operator’s manual and this
manual for procedures and intervals, then inspect and
maintain the entire hydraulic system to insure that the
fluid remains cleans, that all devices function properly
and there are no fluid leaks.
•
•
Refer to the operator’s manuals of your power unit,
your loader and your quick-attach for special or
detailed mounting instructions.
•
This product should fit onto the quick-attach or loader
arms of your power unit the same as the original
products that were designed by your loader / quick-
attach manufacturer.
•
If this product does not fit properly, contact HLA before
operating.
•
Never place your finger into the mounting plate or 3-
point hitch or loader holes. A slight movement of the
power unit or this product could cause serious injury.
•
Make certain all safety signs are in place and legible.
Refer to the safety sign page in this manual for the
placement of safety signs for this product.
•
Replace all damaged or excessively worn parts and
hardware only with genuine HLA parts or with properly
rated fasteners, hydraulic hoses or fittings.
•
Make certain all locking pins, latches and connection
devices are properly installed and secured.
•
Make certain all protective guards, canopies, doors,
etc. are in place and secure.
•
Never use Fork on a power unit that is not equipped
with a cab or ROPS, and operator restraints (seat belts
or equivalent devices).
•
Be careful when raising loaded Fork. Objects could fall
from Fork toward bystanders or operator.
•
Do not use Fork tines for prying or any other purpose
than lifting.
•
Know your loader’s safe operating weight limit and the
weight of your loader attachment.
•
Do not drive across slopes. Go straight up and down.
•
Make no modifications to your Fork.
•
When making repairs, use only genuine HLA parts or
for fasteners, hydraulic hoses or hydraulic fittings, use
only properly rated parts.
•
Replacement parts, for parts with safety signs
attached, must also have safety sign attached.
Think SAFETY!
Work SAFELY!
WHEN OPERATING THIS PRODUCT IN
ACCORDANCE WITH DESIGN INTENTIONS:
BEFORE EACH USE, THOROUGHLY INSPECT THIS
PRODUCT AND:
WHEN MOUNTING THIS PRODUCT TO YOUR
POWER UNIT:
WHEN ADJUSTING, SERVICING OR REPAIRING THIS
PRODUCT:
WARNING
Obey all safety instructions listed in this
section and throughout this manual.
Failure to obey instructions in this section
could result in death or serious injury.
WHEN DEALING WITH HYDRAULICS DURING ANY
TYPE OF ASSEMBLY, OPERATION, MAINTENANCE
OR OTHER WORK ON OR NEAR THIS PRODUCT:
Содержание HDR Series
Страница 2: ... 0 ...
