HLA BK48LF, Руководство оператора

Страница: 17 / 32

17
Check Valve
All Bale Knife models are equipped with a check valve
in the hydraulic circuit. When the cutting arm is up in the
storage position, the check valve blocks hydraulic flow and
prevents the unwanted movement of the cutting arm once
the hydraulics are shut off.
Flow is restored once hydraulic pressure is applied.
Kverneland Tines
Each BK is equipped with seven Kverneland straight
conus 1 32” tines.
Kverneland tines are heat treated, resulting in a tough
tine with superior bale penetration. Ideal for bale handling
chores to the feed site.
Hardened Cutting Knives
The Bale Knife cutting arm assembly features hardened
knife blades to easily cut through bale wrap.
The bolt-on knives allow for easy replacement of a single
knife without needing to replace the entire row.