HLA BIG ARM BH600, Руководство оператора

Страница: 8 / 22

- 6 -
SAFETY SIGN LOCATIONS
PLACEMENT OR REPLACEMENT OF SAFETY
SIGNS
1. Clean the area of application with non-flammable
solvent, then, wash the same area with soap and
water.
2. Allow the surface to fully dry.
3. Remove the backing from the safety sign, exposing the
adhesive surface.
4. Apply the safety sign to the position shown on the
diagram above and smooth out any bubbles.
Item A
Item B
ITEM QTY PART# DESCRIPTION
A 1 BHW01 Injury warning
B 1 BHW02
Backhoe
damage
C 1 BHW03 Hydraulic
D 1 BHW04 Pinch point
INSTRUCTIONS
•
Keep all safety signs clean and legible.
•
Replace all missing, illegible or damaged safety signs.
•
Replacement parts for parts with safety signs attached
must also have safety signs attached.
•
Safety signs are available free of charge from your
dealer or from Horst Welding.
Item C
Item D