BT-3001 BT V1.2 USB Module
BT-3001 User’s Manual
華朗科技股份有限公司
HL-Tech Corporation
HL-Tech Corporation
5
5. Adding a COM port
You can add an incoming port that receives a connection from a Bluetooth device, or you can add an outgoing port
that makes a connection to a Bluetooth device. To connect to a Bluetooth device using a COM port, follow these
steps:
1.
Use the port configuration options in Device Manager to set the COM port configuration.
For the correct data rate and for other settings, see the documentation for the program that you want to
use over the connection.
2.
Set the COM port in the program to the port number that is specified on the last page of the Add Bluetooth
Device Wizard.
This port number is also listed on the
COM Ports
tab in Bluetooth Devices.
Bluetooth devices that use a COM port require special programs on your computer. These programs are typically
included with the device. You can also obtain these programs from the device manufacturers. To set up your
program to use a COM port, follow the instructions in the program documentation.
6. Hardware
The
Hardware
tab in Bluetooth Devices lists the Bluetooth devices that are installed on your computer. This is the
same list that is shown in the Bluetooth Radios category in Device Manager. When you select a device in the list and
then click
Properties
, you see the same device properties as you would see in Device Manager.