HKS MAX IV SP, Руководство по установке

Страница: 28 / 36

80250-AT005
-
9
-
2. Installing the Front Suspensions
NOTICE
Refer to the service manual for torque specs when tightening bolts and nuts. Make sure to tighten the bolts
and/or nuts to the specified torque to avoid the damage to the bolts, nuts and/or shock absorber internals.
1. Referring to “Suspension Components” on page 6, install the
following to the vehicle:
The provided M8 hexagon socket bolt (Torque Specs: 12N·m)
The provided M8 washer
The provided spacer.
(Diagram 2
-
1)
*Note: Tighten the spacer while holding it with a tool such as an
adjustable spanner.
2. Install the front suspension assy to the vehicle, and temporality tighten
the lower front suspension assy installation bolts and nuts ⑤ .
(Diagram 2
-
2)
3. Hold the lower arm with a jack using a wooden block. Align the
upper mount assy’s step to the hole in the body and press it down.
(Diagram 2
-
1)
4. Position the hole of the upper mount ASSY on the desired position
from (A) to (D).
Then install the following parts to the spacer (1.);
The provided M8 hexagon socket bolt (Torque Specs: 12N·m)
The provided M8 washer.
(Diagram 2
-
3)
5. Install the plate and flange bolt.
(Torque Specs: 11N·m)
(Diagram 2
-
4)
◆ Positioning hole of the upper mount assy (Diagram 2
-
3)
Positions
Ⓐ
Camber can be adjusted
Ⓑ · Ⓒ
Both camber and caster can be adjusted
Ⓓ
Caster can be adjusted
2
-
1
Hexagon Socket Bolt (M8),
Washer (M8)
Spacer
2
-
4
Plate, Flange Bolt
2
-
3
Ⓐ
Ⓓ
Ⓒ
Ⓑ
Hexagon Socket Bolt (M8),
Washer (M8)
*Refer to “Camber Adjustment” on page 16.
2
-
2
⑤