HKS 80310-AT006, Руководство по установке

Страница: 36 / 40

80310-AT006
- 15 -
7. Adjusting the Ride Height
Thread Length Adjustment/Vehicle Height Change
Height to be lowered ÷ Leverage Ratio = Amount of Thread Length Adjustment
Example: If the vehicle height of ZN8 is intended to lower by 10mm:
10mm ( Height to be lowered ) ÷ 1.00 ( Leverage Ratio ) = 10mm
Therefore, adjust the thread length by 10mm.
Leverage Ratio: A ratio of the vehicle’ height to the ride height adjuster’s adjustment amount.
(ZN8 – Front 1.00 / Rear 1.32)
CAUTION
There is a limit to shock body length adjustment. Adjust between minimum and maximum figures as shown in
the table above. Using the vehicle with the suspension outside the limit of minimum or maximum shock
body length may cause damage to the suspension.
coming into contact may cause damage to the suspension and/or the vehicle.