HKS 70020-AT115, Руководство пользователя

Страница: 17 / 20

(12) Position the air cleaner to the vehicle, avoiding
unnecessary contact with other parts of the vehicle. Once
the position is determined, secure the air cleaner to the
vehicle using the supplied hose clamps and bolts.
Do not over-tighten the clamps and bolts.
ADVICE:
Use of proper tools can help avoid over-tightening of hose
clamps. (Screw drivers are recommended. Do not use boxed
wrenches since they tend to use more force.) If over-tight-
ened, the air cleaner may bend or become damaged. (Tight-
ening torque: 2.0~3.0 N-m {0.2~0.3 kg-m})
(13) Reconnect the airflow meter sensor connector.
(14) Reconnect the negative terminal to the vehicle’s battery.
Check the following after the installation process is complete.
(1) Check the following before starting the engine:
●
Make sure all pipes and hoses are routed and connected correctly.
●
Make sure all hose clamps are tightened.
●
Make sure the negative cable terminal is securely attached to the battery.
●
Make sure all bolts and nuts are tightened.
●
Make sure all installed components do not come in contact with other parts.
(2) Start the engine and check the following:
●
Make sure air is not leaking.
●
Make sure the RPM rises smoothly after revving the engine 2-3 times while in neutral.
●
Make sure the installed parts are not hitting each other.
●
Make sure there are no issues idling.
●
Make sure there are no loose parts after the engine is stopped.
17
RS_AT115_3-1.01