- 2 - 14005-AZ001/11003-AN018/14020-AN012
/14020-AZ001/14020-AZ002
Installation Diagram
Install the kit parts referring to the diagram shown below:
Cap Bolt x 4
Tightening Torque: N
・
m
（
kgf
・
m
）
T=4.9 - 7.8 (0.5 - 0.8)
Gasket
(For Base Plate)
Top view from the wastegate
Control pressure from EVC is PT1/8 (if EVC is
used together.)
(Refer to the installation manual of EVC for
more details.)
Without EVC, leave it open.
Camber Pressure PT1/8
(Pressure before the
throttle.)
Cap Bolt x 4
Tightening Torque: N
・
m
（
kgf
･
m
）
T=
12.7 - 19.6 (1.3 - 2.0)
Gasket
(For Bypass Out)
Flange
(For Bypass Out)
(Weld to the front pipe.)
Base Plate
○
Use a bypass flexible hose or attachment for operation pressure piping.
Wrap a sealing tape around the thread of PT1/8 screw.
Tightening Torque: N
･
m
（
kgf
･
m
）
T= 14.7 – 24.5 (1.5 - 2.5)
