HOW TO USE
Before first use:
If use the appliance for first time, please clean up the water tank before use. Always unplug
from the plug socket and allow to cool down before cleaning,the surface of the water tank
is wiped over with damp cloth and polished with a soft dry cloth, fill in the clean water to
clean, plug in and let the water flowing until tank is empty and repeat the same steps for
several times, then refill the proper clean water to be ready for operation.
Tips:
First use of the appliance: Please operate the appliance under 100C setting for one minute until
the detection of boiling point is finished.
The appliance is ready for use - set the Temp and Volume to desired settings.
1.
FILL IN WATER
Open the lid, fill the water tank with the desired amount of water, and then close the lid. Note:
the water level must be less the Max level.
Tips:
•
Suggest to use purge water in the appliance
2.
OBTAIN DESIRED WATER
Make sure the plug is connected to the proper wall outlet, and fill in the water with desired
amount. Place your cup on the removable water tray, make sure it aligns with the spout. First
press the Lock button about 3-5 seconds to open by finger, Temp. and Volume setting indicator
lights up, and press the Temp. button to choose your desired temperature and press the Volume
button to set right water volume, Last press the Confirm button to operate the appliance, about
5-8s, the desired water will flow out continuously from water spout,when you obtain desired
water, press the Confirm button, the appliance stop work at once, If you want to obtain water
again, only repeat the above procedure.
