Force gauge Hand Terminal HT 6.0
5
Operating elements
3. Operating elements and functions
The force gauge has two operating modes:
- the measuring mode:
in this mode, the measurements are performed. This is the standard mode of the force gauge, which is always enabled after
switching on.
- the menu mode:
here, the most important data about the force gauge can be read out and configured.
In this mode, the force gauge is calibrated in the factory.
Button
Name in the
measuring mode
Function in the measuring mode
(grey font)
Name in
the menu
Function in the menu
(light blue font)
ZERO
POSITIONING /
TARING
- Zero positioning/taring
and
- Clear peak values
up
- scroll up in the menu
- increase numerical values
PEAK
Toggle between displays:
- of the current measured value
- of the maximum value (= largest
value in positive direction of force)
- of the minimum value (= largest
absolute value in negative
direction of force)
down
- scroll down in the menu
- decrease numerical values
ON / OFF
Switch device on/off
escape
- exit submenu option during entry
without saving
- exit menu, return to measuring mode
MENU
Open the menu
enter
- open selected menu option
- confirm and save entry
HKM-Messtechnik GmbH
www.hkm-messtechnik.com
Operating Instructions Force gauge
Status 03.2011