12
tekst
Use the TV
Make the connection with the desired receiving mode. The connection for
DVB-C (cable / Coax) and DVB-T (antenna) can be found at the rear. For DVB-S
reception (satellite), use the corresponding connection on the rear panel.
DVB-T (antenna)
Whether and how many DVB-T channels can be received by this device is highly
dependent on the location and DVB-T signal strength in the area. DVB-T radio
in particular is very limited and not available at most locations. Please note that
if you use the TV in a different area than before, you must reset the channels.
This is because the frequencies of the channels are very different from region to
region. Channels marked with (internet) are linked to the internet and cannot be
used.
DVB-C (cable / coax)
The programs can be received analogue or digital via DVB-C. If possible, prefer
the digital receive mode. In this mode, more channels are available with better
picture quality.
Coded channels (via provider or satellite)
You can also receive coded TV channels via satellite or DVB-C. That is why you
need a box or Cam module and a SMART CARD from your service provider.
Which programs can be used depends on the contract.
Module and smart card are not included in the delivery. Activating the card
can take a few minutes when it is used for the first time. The device controls the
module after each activation. Note the manual for CI + module and smart card.
Only CI + modules and cards can be used. Other models are not supported.
Indication for CI +
Please note that the recording and time shift function may be limited on
some channels. Recorded files from channels encoded via CI + Card can
only be played on this device. This is limited by the program and we as the
manufacturer are not responsible for this.
Invoerbron en kanaalontvangst
Содержание 32F1D
Страница 1: ...User Manual HKC 32F1D ...
